Menu Mode

1. Press the [MENU] button.
2. Use the [VALUE] knob to select an item.
3. Press the [TAP] button. Each time you press the [TAP] button, you’ll switch between selecting an item and editing its value.
4. Use the [VALUE] knob to edit the value.
5. When you’ve finished making settings, press the [MENU] button to exit MENU.

Menus

Item (Parameter)	Value	Explanation
CONP (COMP)	0 – 100	Adjusts the level of compression applied to BD and SD.
GAIn (GAIN)	0 – 200	Adjusts the gain. Use the [2]–[12] buttons to select the instrument.
tUnE (TUNE)	-128 – 127	Adjusts the tuning (pitch) of each instrument. This can be set for BD, RS, CP, CB, OH, and CH.
dECy (DECAY)	-128 – 127	Adjusts the decay length. This can be set for SD, LT, MT, HT, RS, CP, CB, and CH.
PAn (PAN)	L64 – C0 – r63	Adjusts the pan (left/right position) of each instrument (L64–C0–R63).
bd (BDTYPE)	nrN , L.dCy	Selects the type of BD (Normal, Long Decay).
H. Ln (HiHat Link)	Off, On	If this is On, the settings of OH and CH (Tune and Level settings) are linked. When they are linked, the settings for CH are ignored (OFF, ON).
CH (MIDI Channel)	1 – 1b, Off	Specifies the MIDI transmit/receive channel (1–16, OFF).
SynC (MIDI clock source)	AutO	If MIDI clock is being input to the MIDI IN connector or the USB port, the TR-08’s tempo will automatically synchronize to MIDI clock (Auto).
	Int	The TR-08 operates at the tempo specified on the unit itself. Choose the “INTERNAL” setting if you don’t want to synchronize to an external device (Int).
A. Off (Auto Off)	Off	The power does not turn off automatically.
	30 (min)	The power turns off automatically after 30 minutes. Auto Off does not occur while USB-connected.
dENO (DEMO)	Off , 1 , 3 , 10	Specifies the time until the unit enters LED demo mode.
PrG.N (Compose Mode)	OrG	Lets you record using the same operations as on the TR-808. In this mode, the measures will proceed when you start; record by switching patterns as the measures proceed.
	SteP	Lets you record using the same operations as on the TR-909. After starting, select a pattern. When you press the [TAP] button, the selected pattern is written to the current measure, and you proceed to the next measure.
t.PrN (Track Param)	AUtO, OFF	Automatically recalls the tempo/shuffle settings when a track is selected.
LvL.C (Level Curve)	nrN , SpL	Specifies the curve of the level knob. The level curve setting is applied when you operate the [LEVEL] knob after making this setting.
USB.O (USB MIX output)	OFF, On	Specifies whether each instrument is output from USB MIX. Instruments for which the corresponding [2]–[12] button is blinked are output; instruments for which the button is lit are not output.
OUt (Parallel Out)	OFF, On	The output of the OUTPUT jack (stereo mini) is split between left and right channels, and the specified sounds are output via parallel output. Sounds for which you press the main keys ([2]–[12]) to them blink while making this setting are output from the right channel, and sounds whose key is lit are output in parallel from the left channel. If you want to output in stereo, make all buttons light (default).